High Voltage Engineering Calculators
Six calculators we use when specifying divider, discharge, pulse and multiplier positions, plus a part number decoder. All work in volts, ohms, farads and seconds, so 100 kV and 100 pF go in without unit conversion.
계산기저항 전압 분배기Output voltage, division ratio and total dissipation for a two-resistor divider from 1 kV to 150 kV.계산기Bleeder resistor and discharge timeTime to discharge a capacitor to a safe voltage, or the bleeder resistance needed to reach it within a target time.계산기Capacitor energy and peak currentStored energy, charge and peak discharge current for a pulse.계산기Series capacitors and balancingVoltage split per unit and the balancing resistor that holds it.계산기콕크로프트-월튼 승수No-load output, voltage drop and ripple for a cascade.계산기VCR divider errorWhat voltage coefficient does to a divider ratio at 20 kV.조회 도구HVC part number decoderPaste an HVC disc, doorknob or resistor number and get voltage, dielectric, capacitance, tolerance and body size back.
What these tools are for
Divider and bleeder positions are where high voltage resistors are most often specified, and where the arithmetic is most often done by hand. A divider calculated only by ratio ignores the voltage coefficient of the resistors; a bleeder calculated only by resistance ignores the stored energy and the discharge curve. The calculators give the numbers, and each page states what the number does not cover.
Related specification pages
- High voltage resistors overview — planar, tube and power bar form factors.
- Planar thick film resistors — the usual choice for a divider.
- High voltage capacitors overview — what the bleeder is discharging.
Have the numbers, need the part?
Send the resistance, voltage and tolerance the calculator produced. HVC replies with a matched part number and a 6-hour quotation.
기술 견적 요청 →