공학용 계산기
Voltage Coefficient (VCR) Error Calculator
도표를 읽는 방법. The top resistor changes value as the voltage across it rises, so the ratio at 20 kV is not the ratio you measured on the bench. The curve is that drift and dR/R is the error the calculator returns.
A thick film resistor is not the same value at 20 kV as on a bench meter. VCR is quoted in ppm per volt; this turns it into the resistance change and the divider error it causes.
입력
결과
- R1 change
- -
- Ratio at 0 V
- -
- Ratio at working V
- -
- 비율 오차
- -
- Output at working V
- -
공식
ΔR/R = VCR × V / 1,000,000. Divider ratio = (R1 + R2) / R2; recalculate it with the shifted R1 to get the error.
계산기에 포함되지 않는 항목
- TCR. The resistor also drifts with temperature and the two effects add. A part with −1 ppm/V and 25 ppm/°C can drift more from a 40 °C rise than from full voltage.
- 비선형성. VCR is not perfectly linear; the quoted figure is typical at rated voltage.
- Self-heating. Current through R1 raises its temperature, which shifts the value again.
부품 선택
Where the ratio matters, specify VCR explicitly: the 평면 후막 범위 is quoted for precision divider use, tolerance from 0.2%. For matched pairs, send the ratio and the voltage.
계산된 금액과 관세를 보내주세요: 기술 견적을 요청하세요6시간 이내에 답변드리겠습니다.